1 - 28 of 170 Listings
Rent
All
Width: 3.81 m
Serial Number: UNKOWN
Condition: Used
Number of Shanks: 5
Shank Spacing: 76.2 cm
Shank Type: Parabolic
Description: ### Why Buy this DMI ECOLO-TIGER 530 Ripper?
Maximize your field productivity with this field-ready DMI ECOLO-TIGER 530. This pull-type combinat...
Updated: Wednesday, October 14, 2026 03:09 pm
Location: Rock Falls, Illinois, USA
Seller: Young's Auction Service
Serial Number: UNKNOWN
Condition: Used
Stock Number: 8854
Description: DMI Tiger-Mate II, Approx. 48.6FT Wide, 5-Section, 4-Fold, 3-Bar Harrow, Front Stabilizer Tires, 12.5Lx15 Main Frame Tires, 9.5Lx15 Wing Tires, Pul...
Updated: Thursday, October 08, 2026 11:57 am
Location: Oakes, North Dakota, USA
Seller: Ulmer Auction Service
Condition: Used
Stock Number: 4636
Description: DMI HYDRAULIC WING-FOLD TIGER MATE II FIELD CULTIVATOR, WALKING TANDEMS ON BASE & WINGS, 10" SWEEPS, 4-BAR COIL-TINE HARROW, NICE STRAIGHT CLEAN UN...
Updated: Wednesday, October 14, 2026 12:02 pm
Location: Dodgeville, Wisconsin, USA
Seller: Hennessey Implement
Serial Number: JFH0016243
Condition: Used
Stock Number: 8176
Description: CNH (5) shank deep till ripper w/ rear hyd. leveling disks, front hyd. disk control w/ rock flex cushion springs, 16.5x16.1 flotations, winged poin...
Updated: Wednesday, October 14, 2026 02:12 pm
Location: Brillion, Wisconsin, USA
Seller: C.A. Tesch Equipment
Serial Number: 321771
Condition: Used
Stock Number: 23
Frame Type: 1-Section
Ripper Type: Combination Ripper
Description: DMI Ecolo-Tiger 527 pull type ripper, 5 shank, single disc cutters Quantity: 1
Updated: Wednesday, October 14, 2026 12:59 pm
Location: Elnora, Indiana, USA
Seller: J. Yagle Auction Services
Condition: Used
Stock Number: 167
Description: DMI Tiger-mate 24’ field cultivator, , 7.25” sweeps, 3 bar harrow, walking tandems with walking tandems on wings. Nice tight field cultivator, Crai...
Updated: Wednesday, October 14, 2026 02:35 pm
Location: Sac City, Iowa, USA
Seller: Green Real Estate & Auction Co
Condition: Used
Stock Number: A-11
Description: DMI coulter champ II 11 shank disk chisel with rear parabolic shanks, hyd. coulter gang Quantity: 1
Updated: Thursday, October 08, 2026 09:48 am
Location: Thornville, Ohio, USA
Seller: Wilson National LLC
Serial Number: 222435
Condition: Used
Stock Number: 13382
Description: DMI crumbler, Stock #13382, model 10CR, 21' working width, 10' center with 5' wings.
Updated: Monday, August 03, 2026 04:06 pm
Location: Fort Recovery, Ohio, USA
Seller: Hull Brothers Inc.
Working Width: 9.14 m
Condition: Used
Stock Number: 7281
Description:
Updated: Monday, October 12, 2026 09:57 am
Location: Creston, Ohio, USA
Seller: Maibach Tractor
Working Width: 9.14 m
Serial Number: 222357
Condition: Used
Description: DMI 30’ Roller
Decent paint
Good rollers and bearings
1 owner
1 like new tire, the other is solid but thin on tread
Didn’t see any welds
...
Updated: Wednesday, September 23, 2026 03:38 pm
Location: Neoga, Illinois, USA
Seller: Hillside Equipment
Working Width: 9.14 m
Serial Number: 523189
Condition: Used
Description: DMI Crumbler
30’
Single basket
Very good shape mechanically and cosmetically
Right fold cylinder looks like it may seem slightly
One tire is...
Updated: Wednesday, September 23, 2026 03:38 pm
Location: Neoga, Illinois, USA
Seller: Hillside Equipment
Number of Bottoms: 5
Serial Number: 0006960
Condition: Used
Stock Number: 0003882
Plow Type: Moldboard
Description: DMI 45 Plow - 5-bottom, 16"
Contact
Feel free to call the office. You can also email us at wisebrothersequipment@gmail. com. Let us know if yo...
Updated: Friday, September 11, 2026 09:16 am
Location: Kingdom City, Missouri, USA
Seller: Wise Bros.
Condition: Used
Stock Number: 0003943
Description: DMI 4-bottom plow - heavy duty; exact model unknown
Contact
Feel free to call the office. You can also email us at wisebrothersequipment@gmail....
Updated: Friday, September 11, 2026 09:16 am
Location: Kingdom City, Missouri, USA
Seller: Wise Bros.
Number of Bottoms: 4
Condition: Used
Stock Number: 0003886
Plow Type: Moldboard
Description: DMI 4-16 plow - heavy duty - exact model uncertain
Contact
Feel free to call the office. You can also email us at wisebrothersequipment@gmail. ...
Updated: Friday, September 11, 2026 09:16 am
Location: Kingdom City, Missouri, USA
Seller: Wise Bros.
Width: 3.66 m
Serial Number: 320611
Condition: Used
Number of Shanks: 5
Shank Spacing: 76.2 cm
Mounting Type: 3pt
Description: 5 shank 30'' spacing front disc gauge wheels good wear parts 3pt hitch
Updated: Wednesday, October 14, 2026 09:34 am
Location: Chesaning, Michigan, USA
Seller: Card Bros. Equipment, Inc.
Serial Number: 525087
Condition: Used
Stock Number: MI000372
Frame Type: 1-Section
Ripper Type: In-Line Ripper
Description: Used 1998 DMI 500 In-Line Ripper equipped with 7 shanks, 30" spacing, 3pt mount, MRD shanks
Updated: Wednesday, October 14, 2026 06:14 am
Location: Bluffton, Indiana, USA
Seller: New Holland Tri-County
Serial Number: 421977
Condition: Used
Number of Shanks: 7
Shank Spacing: 76.2 cm
Mounting Type: Pull-Type
Rear Attachment: Yes
Description: Used DMI 7 shank inline ripper with pull type hitch and remlinger 3 bar spike harrow
Updated: Monday, October 12, 2026 07:40 am
Location: Wilkinson, Indiana, USA
Seller: Swindell Farm Equipment, LLC
Condition: Used
Stock Number: 66517
Description: DMI 5 Shank 3pt Inline Ripper Spring Reset Gauge Wheels
Updated: Thursday, September 10, 2026 12:43 pm
Location: Archbold, Ohio, USA
Seller: Yoder and Frey Inc
Serial Number: UNKNOWN
Condition: Used
Description: - Field ready
- 1988
- Good condition
- shoot me an offer or call with any questions
Do you have equipment to sell??
Give Pavel Auction a ca...
Updated: Tuesday, October 13, 2026 09:14 am
Location: Laurel, Nebraska, USA
Seller: Pavel Auction Services
Serial Number: 525966
Condition: Used
Number of Shanks: 5
Shank Spacing: 76.2 cm
Gauge Wheels: Yes
Front Blade Mounting Type: Cushion
Description: 5 Shank 3PT Hitch In-Line Ripper, Coulters, Winged Points
Updated: Tuesday, October 13, 2026 10:28 am
Location: Strawberry Point, Iowa, USA
Seller: K & A Farm Equipment, Inc
Width: 3.66 m
Serial Number: 320569
Condition: Used
Stock Number: 1471
Frame Type: 1-Section
Ripper Type: In-Line Ripper
Description: 5x inline ripper
Updated: Monday, October 12, 2026 09:12 am
Location: Sigel, Illinois, USA
Seller: Sigel Equipment Co., Inc.
Serial Number: 420838
Condition: Used
Stock Number: 11987
Frame Type: 1-Section
Ripper Type: In-Line Ripper
Description: 3 shank 30”, spring trip good shape off a small farm
Updated: Wednesday, September 30, 2026 02:17 pm
Location: Greenwich, Ohio, USA
Seller: J Star Equipment
Width: 3.81 m
Condition: Used
Description: 5 shank dmi inline ripper with 2 setbacks, shipping available
Updated: Thursday, September 24, 2026 09:17 am
Location: Ledyard, Iowa, USA
Seller: Reese Farm Machinery
Condition: Used
Stock Number: 3765
Description: DMI 527 with leveling disk, nice
You are welcome to come, look at any item or pick up a purchase. Please contact us for item location & availabi...
Updated: Tuesday, August 25, 2026 09:55 am
Location: Wheeler, Illinois, USA
Seller: Spiker Farms
Condition: Used
Stock Number: 4930
Description: DMI 527 18" front blades' 16 1/2" rear blades, no welds...$9,300
Updated: Tuesday, September 22, 2026 09:06 am
Location: Amherst, Ohio, USA
Seller: Born Implement
Condition: Used
Stock Number: 1162059
Description: 5 Shank ripper, has leading coulters
Updated: Wednesday, October 14, 2026 11:06 am
Location: Waterloo, Iowa, USA
Seller: P&K Midwest - Waterloo, IA
Width: 3.81 m
Serial Number: 823649
Condition: Used
Stock Number: P26083
Mounting Type: Pull-Type
Rear Disk Blade Size: 48.26 cm
Description: DMI Ecolo-Tiger 530B disc ripper. 12' 6'', 5 shank, 30'''shank spacing, 19'' smooth blades,16'' blade spacing, 10'' pts.leveling discs.16.5-16.1 ti...
Updated: Tuesday, September 22, 2026 04:12 pm
Location: Belle Fourche, South Dakota, USA
Seller: Scott Peterson Sales
Width: 3.96 m
Serial Number: JFH0028391
Condition: Used
Number of Shanks: 5
Shank Spacing: 76.2 cm
Mounting Type: Pull-Type
Description: Very nice DMI 530B 5 shank disk ripper
Updated: Thursday, October 08, 2026 08:20 am
Location: Norfolk, Nebraska, USA
Seller: Pfeifer's Machinery Sales